Overland Storage PowerLoaders AIT-2, User & Installation Manual

Page: 78 / 106

4-4
u
Maintenance
R
UNNING
A C
LEANING
C
ARTRIDGE
Using the Demo Submenu
Use this option to fully exercise the library robotics.
1) From the Maintenance Menu, select the Demo Submenu.
2) Select Demo 1.
The library robotics begin to move cartridges randomly from slot to slot, displaying the number
of moves on the screen. If all slots in the magazine are full, Demo 1 loads a cartridge into Drive
1 and leaves it there.
If you press the p button while Demo 1 is running, the PowerLoader™ loads a cartridge into
Drive 1, unless Drive 1 is full. In that case, the PowerLoader™ unloads drive 1. Each time the p
button is pushed again, Drive 1 is loaded or depending on its status.
If there are two drives in the library, the p
button
functions the same way as the p
button
for
Drive 2.
Pausing Demo 1
To pause the test, press and hold the
Escape
button until a flashing message displays that the
test is paused.
Stopping Demo 1
To stop the test, press the
Escape
button a second time to return to the Main Menu.