Overland Storage PowerLoaders AIT-2, User & Installation Manual

Page: 68 / 106

3-16
u
Operation
U
SING
P
OWER
L
OADER
™ M
ENUS
Figure 3–23. Main Menu
The Press
Enter
to display the first Load/Unload submenu:
Figure 3–24. Load/Unload Initial Screen
The u is next to line 2 of the display. Line 2 shows the top item in a scrollable list of sources.
Note that an
$$$$
has appeared on the right of the bottom line. This indicates that the q button
may now be used to scroll through the list, and that the top item on the list is displayed. As soon
as you press the
q button, the following three things happen:
•
The list scrolls down one item (only line 2 scrolls)
•
An
£
displays on the right of line 1, meaning there are more options above the item
displayed on line 2
•
The
✶
at the left of line 2 (the current selection) disappears, meaning you have not
selected an item from the list.
The contents of the lists on line 2 and line 4 vary as follows.
Initial Screen - From Line
The list on line 2 (the From line) includes every drive and magazine slot (including mail slots)
with cartridges. (You can't retrieve a cartridge from an empty slot or drive.)
Initial Screen - To Line
The list on line 4 (the To line) includes all the valid destination choices, that is, drives and slots
that are empty. (You can't put a cartridge into a full slot or drive.)
Scroll List - To Line
There is another limitation on the To list. If you have selected a drive on the From screen, the
To list can include only slots. If you have selected a slot on the From screen, the To list can
contain only drives.
Let us assume that you want to load the cartridge that is in Slot 11 into any available drive. Use
the
q button to scroll line two to Slot 11. The following screen displays:
u u u u
Load/Unload
Remove
Maintenance
Configure $
From:
u u u u ✶ ✶✶ ✶
Slot 1
To:
✶
✶✶
✶
Drv 1 $