Overland Storage PowerLoaders AIT-2, User & Installation Manual

Page: 64 / 106

3-12
u
Operation
U
SING
P
OWER
L
OADER
™ M
ENUS
Using the Menu Mode
When the Library Pro enters the Menu Mode, the Ready light goes out. This means that
the module is offline, and responds to all commands from the host with a SCSI Not Ready
until you exit the Menu Mode and the
Ready light goes on.
To prevent interruption of host operations, you can lock out the Menu Mode using the Security
Menu. See Security Menu later in this chapter. When all control panels are locked, you must
enter your unlock code to display the Main Menu.
When the Default Screen displays, you can enter the Menu Mode by pressing the Enter button.
The Main Menu displays.
Figure 3–13. Main Menu
If the Control Panel has been locked, the following screen displays instead of the Main
Menu. You must know the unlock code for the PowerLoader™ before you can continue.
Figure 3–14. Panel Locked Screen
When you press the Enter button, the Code Entry Submenu displays.
Figure 3–15. Code Entry Submenu
Using the p button and the q Buttons, set the first digit of the unlock code. Press the Enter
button to move the cursor to the second digit and repeat the process. Press the Escape button,
then the Enter button to confirm your entry. If the code is correct, the Main Menu is displayed. If
the code is incorrect, an error screen displays.
Exiting The Menu Mode
To exit the menu mode and return to the Default Screen, press the Escape button repeatedly.
Each time you press the Escape button, the display moves to a higher menu level. When the
Main Menu is visible, pressing the Escape button once returns to the Default Screen. At this
point, the
Ready LED lights.
u
u u
u
Load/Unload
Remove
Maintenance
Configure $
Front Panel
ENTER to Unlock
ESCAPE to
Unlock Code
“
#
$