L-718-8-E
0
4.4.2 Sanitary Fitting Type
The sanitary fitting type is of clamp connections.
Using pipe fittings (option), install according to the
procedure given below.
(1) Welding the companion sleeve (weld
ferrule
)
Weld the companion sleeves furnished to the
piping. Pay attention to the perpendicularity
of ferrule end face and difference in height at
the weld. As piping material, use JIS G 3447
Stainless Steel Sanitary Tubes.
(2) Installation
Sandwich the gasket between the sensor and
ferrule and tighten with the clamp. Be sure to
install the gasket in line with the groove in the
ferrule end face before tightening up.
4.4.3 Screw-in Type
Sandwich an O-ring between the sensor and
union fitting and then tighten them firmly.
Fig.4.6 Installation of Sanitary Fitting Type
Companion Sleeve ※
(Weld Joint Ferrule)
※: Option
ULTRAmass MK
Ⅱ
Clamp ※
Gasket ※
Butt Weld
Pipeline
Meter
Body
Fig.4.7 Installation of Screw-in Type
Gland
O-Ring
Union Fitting
Summary of Contents for Ultra mass MKII CN003
