Oval Ultra mass MKII CN003, Instructions Manual

Page: 60 / 72

L-718-8-E
0
APPENDIX
Parameter Lists:
About the parameters set up
Factory set: Parameters are factory set; do not attempt to change them.
Spec. set: Parameters are set at factory according to the specification. If later changes are
desired, take into consideration the operating environment.
Setpoints at shipment: Available space for entering the parameters set before shipment.:
Setpoints: Available space for entering the parameters after later changes.
No.
Item Description
Parameter Setpoints at
Setpoints
set up shipment
Assign
1 Analog output 1 Analog output 1 select Spec. set
2 Analog output 2 Analog output 2 select Spec. set
3 Pulse output Pulse output select Spec. set
Config fld dev var
4 Mass flow unit Mass flow unit select Spec. set
5 Vol flow unit Volume flow unit select Spec. set
6 Flow direction Flow direction select Spec. set
7 Flow damp (Mass) Flow (mass) damping setup Spec. set
8 Flow cutoff Flow (mass) cutoff setup Spec. set
9 Dens unit Density unit select Spec. set
10 Dens damp Density damping setup Spec. set
11 Slug low limit Slug flow density low limit setup Spec. set
12 Slug high limit Slug flow density high limit setup Spec. set
13 Slug duration Slug flow duratin setup Spec. set
14 Compensation Density compensation setup Spec. set
15 Standard temp Referece temperature setup Spec. set
16 Expansion Coef Expansion coefficient setup Spec. set
17 Temp unit Temperature unit setup Spec. set
18 Temp damp Temperature damping setup Spec. set
Analog output 1
19 URV Analog output 1 20mA flowrate setup Spec. set
20 LRV Analog output 2 4mA flowrate setup Spec. set
21 Lowcut Analog output 1 low cutoff setup Spec. set
22 Added damp Analog output 1 added damping setup Spec. set
Analog output 2
23 URV Analog output 2 20mA flowrate setup Spec. set
24 LRV Analog output 2 4mA flowrate setup Spec. set
25 Lowcut Analog output 2 low cutoff setup Spec. set
26 Added damp Analog output 2 added damping setup Spec. set
NOTE: No. 3 and 5 are found only in CT9401 and MT9411. No. 9 to 16 is not found in EV9201.