Do Not Attach Walls To
Floor until Step 23.
15.
Position rear solid wall into
place on plywood floor. Butt both
vertical wall studs of side and rear
walls together and attach with
3 - 2.5” screws. Screw at the
bottom, middle and top of stud to
secure properly.
Rear
W
all
Panels
Rear
Solid
Wall
Side
Solid
W
all
16.
With the corner wall
attachment complete, position
rear wall so bottom 2x3 wall
framing is sitting flush with
outside floor joists and
plywood floor. Wall siding
should overhang floor by
approximately 1/2”
When positioned correctly,
add a second rear wall panel
and attach both rear wall
panel studs together as per
Step 15
.
Rear
Solid
W
all
2x3 wall framing flush
with outside of plywood.
Be sure that rear
wall panels fit
between the side
wall panels
(sandwiched)
Side W
all Panel
Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 8
