Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 30
78.
Attach
Flower Box
below bottom of
window trim with 2 - 2” screws per box.
Screw from inside of box into the center wall stud.
Attach second screw 2” below top screw.
75.
Position and attach
Vertical Door Flange
on inside door frame
(left door from outside)
using 6 - 2” screws. Position on inside edge of door frame.
76.
The
Interior Cane Bolt
will be attached to Vertical
Door Flange. To position Cane Bolt correctly, attach to
flange first, close doors and mark hole to house Cane
Bolt Rod. Open doors and drill hole where previously
marked with 9/16” bit. Use hardware provided in each kit
to complete installation of all hardware.
Left Door
from
77.
Attach
Door Handles and Exterior Barrel
Bolt
to doors. Handles are positioned on top
section of each door. Male Barrel Bolt piece will
be positioned on left door trim.
Inside Edge of
Door Frame
Outside
