Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]
Page 10
20.
Complete both Narrow Wall attachments making sure 2x3 wall framing is flush with floor
joists and plywood and siding of wall is overhanging the floor by approximately 1/2”.
21.
In the next steps, the Door Header is attached. There are 2 short and 1 long 2” X 3” pieces . Start
by attaching both short end pieces using 2 - 2 1/2” screws. Screw from top down into wall framing.
22.
Position and attach the longer Door Header to wall framing when Header is sitting flush with
inside of wall framing and against shorter Door Header end pieces. Attach with 4 - 2 1/2” screws.
Sits flush with inside
of wall framing
