Outdoor living today 8x15 SpaceMaker Garden Shed Assembly Manual Download Page 1 | Manualshive

Page: 1 / 31

background image

8x15 SpaceMaker

Garden Shed

Assembly Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 1

Revision #5

Oct 28, 2008

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your
purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.

Thank you for purchasing
an 8x15 SpaceMaker Storage
Shed from Outdoor Living
Today. Please take the time
to identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
shed and retain the manual for future
maintenance purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers
free of any liability for improper installation, maintenance and repair.

1
2
3
...
»

Summary of Contents for 8x15 SpaceMaker Garden Shed
































Reviews:

No comments

Related manuals for 8x15 SpaceMaker Garden Shed

Brand: Palmako Pages: 154

Brand: Gazebo penguin Pages: 54

Brand: Shire Pages: 22

Brand: Lemeks Pages: 59

Brand: Lemeks Pages: 79

Brand: new garden Pages: 63

Brand: Walton Pages: 3

Brand: Palmako Pages: 69

Brand: Gazebo penguin Pages: 14

Brand: Palmako Pages: 93

Brand: Palmako Pages: 104

Brand: Palmako Pages: 54

Brand: Palmako Pages: 54

Brand: VERANDA JARDIN Pages: 28

Brand: Palmako Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands