OTT HydroMet SUTRON XLINK 100 Operation & Maintenance Manual Download Page 50

Page: 50 / 248

Page

248



Click Send



Reboot XLink

Another way is to use a USB thumb drive:



To do so, create file on USB thumb drive: \Sutron\XLink\AllStations_setup.txt



Place the following text in the file: RS232 BAUD RATE = 9600



Insert drive into XLink. Wait for LED to turn solid green (solid red means failure).



Remove Drive



Reboot XLink

Once setup with the display, please note the following:



X-Link Python scripts will no longer be able to use the RS-232 port.



LinkComm will not be able to connect to X-Link via the RS-232 port. Please use the USB port
instead.



To work with X-Link, the Display requires version 4.05 or newer



To work with the Display, X-Link requires version 8.27 or newer

Summary of Contents for SUTRON XLINK 100

























































































































































































































































Search results

Summary of Contents for SUTRON XLINK 100

Reviews:

Related manuals for SUTRON XLINK 100

Brands by name

Popular brands

OTT HydroMet SUTRON XLINK 100, Operation & Maintenance Manual

Search results

Summary of Contents for SUTRON XLINK 100

Reviews:

Related manuals for SUTRON XLINK 100

Brands by name

Popular brands