SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Management and Diagnosis
6-9
6.8.
Trace Route Diagnosis
5. Click
.
The page is shown in
Figure 6-10 Trace Route Diagnosis Page
6. Set the parameters. For the description of the parameters, refer to
Table 6-5 Parameter Descriptions for Trace Route Diagnosis
Parameter
Description
IP Address or
Host Name
Destination IP address or host name for the Trace Route operation.
WAN
Connection
To select the WAN connection to be used.
Maximum Hops
Maximum number of hops that the Trace Route packets require for arriving at
the destination, default: 30.
Wait Time
(in ms)
Time allowed for receiving a response in milliseconds (ms). If no response is
received during this period, an asterisk is displayed. If multiple asterisks are
displayed, it indicates that the corresponding node fails.
Protocol
Options: UDP and ICMP.
7.
After the configuration, click
Diagnosis
to diagnose the connection. The system will
display the diagnosis results.
8.
Click
.
The page is shown in
Figure 6-11
.
