SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
3-22
Parameter
Description
Ingress
Specify the data traffic direction. The Ingress option and
Egress option cannot be the same.
l If the Ingress is LAN, the Egress should be a WAN
connection. The data traffic direction is upstream.
l If the Ingress is a WAN connection, the Egress should be
the LAN. The data traffic direction is downstream.
Egress
Specify the data traffic direction. The Ingress option and
Egress option cannot be the same.
l If the Ingress is LAN, the Egress should be a WAN. The
data traffic direction is upstream.
l If the Ingress is a WAN, the Egress should be the LAN.
The data traffic direction is downstream.
The configuration of IPv6 filter refers to the configuration of IPv4 filter.
13. Click
Apply
button to apply the changes.
– End of Steps –
3.5.3.
Configure the Local Service Control
The section describes how to configure local service control.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > Security > Local
Service Control
to go to the
Local Service Control
page.
Local Service Control-IPv4
2. Click
to open
Service Control-IPv4
page, as shown in
Note:
