OTE Speedport Entry 2i, Maintenance Management Manual

Page: 14 / 99

SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
2-2
Follow-Up Action
After the IP address of the computer is set, you can run the
Ping
command to ping the
IP address 192.168.1.1. If the ping operation is successful, it indicates that the TCP/IP
configuration is correct and the computer is properly connected to the Speedport Entry 2i.
2.2.
Login
The Speedport Entry 2i provides a web-based configuration and management system.
You can enter a specified IP address in the address bar of Internet Explorer to access the
system.
Prerequisite
A computer is directly connected to the Speedport Entry 2i, and their IP addresses are in
the same network segment.
Steps
1. Open the Internet explorer, and enter
http://192.168.1.1
(default
maintenance IP address of the Speedport Entry 2i) in the address field. Press the
Enter key. The login page is displayed, see Figure 2-1 .
Figure 2-1 Login Page
2. Enter your username and password (the default username of the administrator
is admin ) and click Login . The configuration page is displayed, as shown in Figure
2-2 .