SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
3-16
Parameter
Description
Conforming Action
The conforming action includes:
l Null
l Drop
l DSCP Mark
l 802.1p Mark
l DSCP Mark & 802.1p Mark
Non-conforming Action
The non-conforming action includes:
l Null
l Drop
l DSCP Mark
l 802.1p Mark
l DSCP Mark & 802.1p Mark
Excess Burst Size
Excess burst size.
Partial Conforming Action
The partial conforming action includes:
l Null
l Drop
l DSCP Mark
l 802.1p Mark
l DSCP Mark & 802.1p Mark
DSCP Re-marking
QoS classification criterion. A DSCP is specified for the TOS byte
in the IP header of each packet to indicate the priority. Range:
0–63.
802.1p Re-marking
If VLAN is enabled, you can modify service priority through this
parameter. Range: 0–7. A higher number indicates a higher
priority.
Peak Rate
Peak rate.
Peak Burst Size
The value of "Peak Burst Size" is recommended as 1/8 of the
"Peak Rate" value.
2. Click
Apply
button to apply the changes.
– End of Steps –
–
3.4.5.
Configure the QoS Traffic Shaping
This page provides the parameters of QoS traffic shaping configuration features.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > QoS > Traffic shaping
to go to the
Traffic shaping
page, as shown in
