SJ-20162405182123-002|2016-05-24 (R2.0)
Configure the Internet
3-5
Parameter
Description
DHCPv6
If you set the radio button to
On
, the device acquires a DNS
address through DHCPv6.
And the
Request GUA
,
Request PD
,
GUA from PD
need to be configured.
GUA
Mode of obtaining a global address.
PD
Prefix Delegation.
NAT
Set radio button to
On
to enable the NAT switch function. When multiple
computers in a LAN share one IP address to visit the Internet, NAT is used
to transfer the private network address to the public network address of
the WAN port. If NAT is not set to
On
you can configure the host/subnet
that will be NATted (for host 192.168.1.100, configure:192.168.1.100/32)
Manual DNS
If setting radio button to
On
, you need to configure DNS1–DNS3.
VLAN
Specifies whether to carry a VLAN tag in the packets sent over the WAN
connection. By default,
On
button is not selected. If it is selected, a VLAN
tag is carried in the packets sent over the WAN connection, and the VLAN
ID must be set.
VLAN ID
Identifies a VLAN. Range: 1–4094. To ensure normal service operation, the
VLAN ID
must be the same as that set by the network service provider who
will inform the user about the value of the VLAN ID field.
4. Click
Apply
button to apply the changes.
– End of Steps –
3.2.2.
Configure the DSL
This page provides the parameters of DSL connection configuration function.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > WAN
to go to the
DSL
page, as shown in
