SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
3-2
Before checking the information on WAN Ethernet (LAN1), make sure that Ethernet
WAN switch (
Internet > Ethernet WAN
) is set to
On
.
2. Click
Refresh
to refresh the information.
– End of Steps –
3.2.
Configure the WAN
3.2.1.
Configure the WAN Connection
This procedure describes how to configure a broadband connection (WAN connection) on
the network side, so that user services (including the data, voice, and video services) can
be connected to the external network.
The Speedport Entry 2i supports Route-based and Bridge-based WAN connections.
l Route-based connection
l Bridge-based connection
Prerequisite
Before configuring the
WAN Ethernet (LAN1)
, make sure that the button
On
(
Internet >
Ethernet WAN
) is set and
Apply
button is pressed.
Steps
1. On the main page of the Speedport Entry 2i, select
Internet > WAN
to go to the
WAN
Ethernet (LAN1)
page.
2. Click
to go to the page of creating a new Ethernet connection,
Note:
