SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
4-2
4.2.
Configure the WLAN
4.2.1.
Configure the Basic Parameters of the WLAN
The section describes how to configure WLAN basic settings.
Steps
1. On the main page of the Speedport Entry 2i, select
Local Network > WLAN > WLAN
Basic
to go to the
WLAN Basic
page.
WLAN On/Off Configuration
2. Click
The page is shown in
Figure 4-2 WLAN On/Off Configuration
lists the WLAN on/off configuration parameters.
Table 4-1 WLAN On/Off Configuration parameters
Parameter
Description
Mode
The device supports two modes:
l Manual
l Scheduled Power On
In scheduled power on mode, when the device synchronizes
to network time, the wireless will be switched on.
WLAN (2.4GHz)
Click
On
to enable the wireless.
On Time/Off Time
Only valid when the device works in scheduled power on mode.
3. Click
Apply
button to apply the changes.
WLAN Global Configuration
4. Click
.
The page is shown in
Figure 4-3
.
