SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
3-14
Figure 3-8 Congestion Management Page
lists the QoS congestion management parameters.
Table 3-4 Parameter Descriptions for the QoS Congestion Management
Parameter
Description
Queue Switch
On: enable the function of queue.
Off: disable the function of queue.
Interface
The Interface including WAN (LAN1), LAN2, LAN3 and LAN4.
Each interface can be configured up to 8 queues. When the queues of
an interface are emptied, scheduling policies will be removed.
Name
To create a QoS congestion, enter the name of the congestion.
Priority
Queue priority.
Range: 1 ~ 8.
Algorithm
Queue algorithm.
l
SP
: Under the same interface, if a queue's algorithm is SP, its priority
must not be used by other queues.
l
WFQ
: If the algorithm is WFQ, scheduling policies will take effect only
when the total weight of WFQ queues with the same priority is 100%.
Weight
Unit: %.
Rate
Unit: bps.
Traffic Classes
Categorization mechanism.
Traffic Classes
are used to bind a classification to a queue. Use "," to
join numbers when binding several classifications, e.g. "1, 2, 10". Please
note that different queues in an interface cannot bind the same
classification.
As Default Queue
Set radio button to
On
to enable the function. There is a default queue in
every interface. If not specified, the first queue will work as the default
queue, otherwise, the last setting queue will be the default queue. Note
that the default queue is automatically enabled and can not be disabled.
Queue Statistics
Set radio button to
On
to enable the function.
