SJ-20162405182123-002|2016-05-24 (R2.0)
Speedport Entry 2i Maintenance Management Guide
4-14
Figure 4-17 Port Control Page
17. Select the LAN interface or SSID on which you want to disable or enable the DHCPv6
and RA function.
l Click
All On
to select all IPv6 Service-Port control types.
l Click
All Off
to cancel all IPv6 Service-Port control types.
– End of Steps –
4.4.
Configure Route Menu
4.4.1.
Configure Routing (IPv4)
The section describes how to configure IPv4 routing, which provides the parameters of
route (IPv4) configuration features.
The relevant information of Internet status includes
Routing Table
,
Static Routing and
Policy Routing
.
Prerequisite
Before configuring
Routing (IPv4)
, make sure that the IPv4 WAN connection is created.
Steps
1. On the main page of the Speedport Entry 2i, select
Local Network > Route > IPv4
to
go to the
Route (IPv4)
page.
Routing table
Note:
