Operating instructions for Pool control-40.net filter control unit
Page: 28 (34)
Information page
This page shows graphically the current operating status of the pool
control unit.
Main menu
This is the page where you can make various settings for the pool control
unit. The language for the web server can also be set here.
You (the user) can make the most common filter installation
settings from this submenu.
The current operating status can be opened from this
submenu.
The operating protocol for the filter control unit can be opened
from this submenu.
The installation can be manually controlled from this
submenu.
In this submenu, you can open the temperature curves stored
as CSV files for graphical display and for processing using
spreadsheet software.
In this submenu, the service engineer can make advanced
settings for the filter installation (login using Service PIN
required).
Pool settings
On this page, you (the user) can select which settings you wish to change
for the pool control unit.
Settings for the various pool-heating operating modes.
Settings for filtration and automatic backwashing.
Settings for the auxiliary output.
Settings for ECO mode.
Heating settings
Temperature setpoint
On this page, you can set the temperature you require for the swimming
pool.
You can also select the operating modes for the different heating systems.
Solar heating can only be enabled if a solar sensor is connected.
Frost protection function
This is the page where you can make settings for the frost protection
function.
Frost protection can only be used if an air temperature sensor is
connected.
