Operating instructions for Pool control-40.net filter control unit
Page: 23 (34)
Auxiliary output
Press the button.
Use the
and
buttons to scroll through the menu until the
display shows "auxil. output".
Press the
button to select the settings for the auxiliary output
(U4).
Operating
mode
Press the button to select the operating mode using the and
buttons.
The following options can be set:
The auxiliary output is permanently on.
The auxiliary output is permanently off.
The auxiliary output is controlled by its timer.
Press the button to save the setting.
Timer
Use the
and
buttons to scroll through the auxiliary output
settings until the display shown here appears.
Press the button to program the timer. (See Procedure described
under Timer programming).
Cycle time
Use the
and
buttons to scroll through the auxiliary output
settings until the display shown here appears.
Press the button to set the cycle time using the and buttons.
Press the
button to save the setting. The auxiliary output is
switched on and off on the basis of this setting. A setting of 0
minutes means that there is no cycling of the auxiliary output on and
off.
Adjustment range 0 to 240 minutes, factory setting 0
ON period
Use the
and
buttons to scroll through the auxiliary output
settings until the display shown here appears.
Press the
button to set the ON period (pulse duration) using the
and
buttons. This does not affect the cycle time. Press the
button to save the setting.
Adjustment range 5 to 240s, factory setting 10s
Interlock
Use the
and
buttons to scroll through the auxiliary output
settings until the display shown here appears.
Press the
button to use the
and
buttons to select whether
the auxiliary output is meant to be interlocked to the filter pump.
Press the
button to save the setting. When the interlock is
enabled, the auxiliary output is only switched on during filtration.
Factory setting: no interlock
Network (LAN)
Press the button.
Use the
and
buttons to scroll through the menu until the
display shows "network (LAN)".
Press the button to select to display the network parameters.
IP address
Press the button to display the current IP address for the unit.
Device ID
Use the
and
buttons to scroll through the network details until
the display shown here appears.
Press the button to display the device ID used to denote the unit
in the
communications server.
User PIN
Use the
and
buttons to scroll through the network details until
the display shown here appears.
Press the button to display the current PIN number for the end
customer.
