Operating instructions for Pool control-40.net filter control unit
Page: 15 (34)
Controls on the front panel
LCD
Normal operating display showing actual time and water temperature.
The filter pump is off (pause in filtration).
LCD
Normal operating display showing actual time and water temperature.
The system is in normal filtration mode.
LCD
Normal operating display showing actual time and water temperature.
The system is running in ECO mode.
LCD
The filter pump is still running temporarily after switching off the heating.
LCD
The filter pump has been switched on by the built-in level control system.
LCD
The filter pump has been switched off by the built-in level control system.
LCD
The filter is being backwashed using the slide valve on terminal U10. The
display shows the time remaining for backwashing.
LCD
The filter is being rinsed using the slide valve on terminal U11. The display
shows the time remaining for rinsing.
LCD
The filter is being backwashed by a Eurotronik controller connected to
terminals 2-5.
LCD
The level sensors are not connected properly or are connected in the wrong
order.
LCD
The filter pump has been switched off by a connected EUROTRONIK-10
controller or the winding protection switch.
LCD
The filter pump has been switched off by the electronic motor protection
device. To switch the pump back on, press the
button once the pump
has cooled down.
LCD
The filter pump has been switched off by the flow sensor connected to
terminals 21 and 22. To switch the pump back on, press the
button once
the fault has been rectified.
LCD
The filter pump has been switched off because current is not flowing in all
three phases of the 3-phase supply. To switch the pump back on, press the
button once the fault has been rectified.
LCD
Temperature control not working because the temperature sensor is
disconnected or faulty.
Control unit
This button can be used to switch the entire control unit on and off.
Caution! This does not disconnect the control unit from the power supply
LCD display
ON/OFF
Manual/Automatic
Reset
"ECO" button
Temperature selection
Timer programming
Time setting
Heating indicator light
Filter pump indicator light
"Increase value" button
"Decrease value" button
"Menu" button
"Scroll right" button
"Scroll left" button
Solar heating indicator light
