Operating instructions for Pool control-40.net filter control unit
Page: 20 (34)
Solar heating
Press the button.
Use the
and
buttons to scroll through the menu until the
display shows "solar heating".
Press the button to select the solar heating settings.
Operating
mode
Press the button.
The display shows the current operating mode for the solar heating
(automatic mode or off). You can use the and buttons to
change the selection. Press the button to save the setting.
Priority
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the button to enable or disable the priority using the and
buttons. Press the
button to save the setting. With priority on
(enabled), the solar heating (and simultaneously the filter pump) is
also actuated outside filtration operating times.
Factory setting: priority on
Minimum
switching
interval
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the
button to set the minimum switching interval
(hysteresis) using the and buttons. Press the button to save
the setting. The minimum switching interval is set in seconds.
Adjustment range 10 to 1800s, factory setting 120s
Switch-on
difference
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the
button to set the switch-on difference (difference
between pool temperature and solar temperature) using the and
buttons. Press the button to save the setting.
Adjustment range 0.5 to 20°C, factory setting 5°C
Switch-off
difference
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the
button to set the switch-off difference (difference
between pool temperature and solar temperature) using the and
buttons. Press the button to save the setting.
Adjustment range 0 to 15°C, factory setting 0°C
Temperature
boost
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the button to set the solar heating temperature boost using
the
and
buttons. Press the
button to save the setting. The
pool temperature is only boosted by the set value during solar
operation.
Adjustment range 0 to 15°C, factory setting 5°C
Pump speed
Use the and buttons to scroll through the solar heating settings
until the display shown here appears.
Press the button to set the filter pump speed using the and
buttons.
The following settings are possible (only for variable-speed filter
pump):
In solar operating mode, the filter pump runs at "
filtration
" speed
.
In solar operating mode, the filter pump runs at the higher
"
backwash
" speed.
In solar operating mode, the filter pump runs at the speed for the
current operating mode, either
"ECO mode = low speed"
or
"filtration
mode = filter speed".
Press the button to save the setting.
