Operating instructions for Pool control-40.net filter control unit
Page: 29 (34)
Settings for the filter installation
This is the page where you can select the timers for the filter pump and
backwashing using slide valves.
Settings for the auxiliary output
This is the page where you can make settings for the auxiliary output.
The timer can be used to define the operating times for the output. If the
output is meant to be switched periodically, the cycle time and the ON
period can be set here. A cycle time of 0 minutes means that the output is
not switched periodically.
You can also specify here whether the output is meant to be interlocked to
the filter pump.
Settings for ECO mode
You can select the timer for ECO mode on this page.
You can also set the reduction in water temperature for ECO mode.
Settings for the service engineer
This is the page where the service engineer can make settings. Any
changes to these settings requires prior login using the Service PIN.
Operating statistics
A range of operating hours counters and counters for specific operating
states can be read from this page.
