Orion OLW-4651, User Manual

Page: 32 / 42

- 60 - - 61 -
ORION
Hybrid Video System
- Receive Data
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master Control
Image Processor
Module ID
IP ID
Value 0X02 0x88 0x0C Variable Variable 0x01 ……….. Variable
0x03
- Control(10 Bytes)
No. Data Length Explanation
1 Brightness 1 byte Range: 0(0x00)~100(0x64)
2 Contrast 1 byte Range: 0(0x00)~100(0x64)
3 Sharpness 1 byte Range: 0(0x00)~28(0x1C)
4 White Balance-Gain R 1 byte Range: 0(0x00)~255(0xFF)
5 White Balance- Gain G 1byte Range: 0(0x00)~255(0xFF)
6 White Balance Gain B 1byte Range: 0(0x00)~255(0xFF)
7 White Balance – Offset R 1byte Range: 0(0x00)~255(0xFF)
8 White Balance – Offset G 1byte Range: 0(0x00)~255(0xFF)
9 White Balance – Offset B 1byte Range: 0(0x00)~255(0xFF)
10 Gamma 1byte Range: 0(0x00)~6(0x06)
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
13. Test Pattern
- The command for loading the embedded patterns on LCD screen.
A. General Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master
Image Processor
Module ID
IP ID
Value 0X02 Variable 0X02 Variable Variable 0x01 Variable 0x03
- Send To MLCD
- CMD : 0x57(Red), 0x58(Green), 0x59(Blue), 0x5A(White), 0x5C(Test), 0x5B(Screen)
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
B. Broadcast Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Image Processor
Module ID
IP ID
Value 0X02 Variable 0X01 0x00 Variable
0x03
- Send To MLCD
• Send the same command for all MLCD. No response will be made.
11. Dimming Control
- The command for controlling the backlight of LCD
A. General Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Control
Image Processor
Module ID
IP ID
Value 0X02 0xDC 0X02 Variable Variable Variable Variable
0x03
- Send To MLCD
- CMD : 0xDC
- Control Value : 0~100(0x00~0x64)
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
B. Broadcast Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Control
Image Processor
Module ID
IP ID
Value 0X02 0xDC 0X02 0x00 Variable Variable 0x03
- Send To MLCD
• Send the same command for all MLCD. No response will be made.
- Receive Data
STX CMD LENGTH
Data
Check sum ETX ID(1Byte)
Control
Image Processor
Module ID
IP ID
Value 0X02 0xDC 0X02 Variable Variable Variable Variable 0x03
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
12. Get Picture Control Data
- The command for checking the current Picture Control Data of LCD
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master
Image Processor
Module ID
IP ID
Value 0X02 0x88 0X02 Variable Variable 0x01 Variable
0x03
- Send To MLCD
- CMD : 0x88
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
• Commands cannot be executed with Broadcast mode.