Orion OLW-4651, User Manual, Page: 14 / 42

- 24 - - 25 -
ORION
Hybrid Video System
5.3. Control signal connections
5.3.1. Setting of COM Port
• Com Port connects or disconnects the communication between PC and MLCD.
• Connect MLCD to PC Com Port via RS-232C cable.
• Go to MSCS Menu -> Communication and set Com Port. Click 'Connect' using mouse or press
'Ctrl+C' using keyboard.
• In order to disconnect communication, click 'Disconnect' using mouse or press 'Ctrl+D' using
keyboard.
When you use USB-to-RS-232C converters, you need to set Com Port again, because MSCS
uses one of Com Port no. 1 to 30.
※ Available Com Port on the PC is automatically recognized and displayed.
• Com Port Configuration
Baud Rate 115200bps(Fixed)
Data Bit 8Bits
Parity None
Stop Bit 1Bit
Flow Control None
5.3.2. Setting of LAN Port
1)¡In¡case¡of¡connecting¡to¡a¡LAN¡Hub
• This function is used to control the MLCD via LAN PORT.
• During the setting process, MLCD and control PC should be connected via RS-232C cable only. Do not
connect ethernet cable.
• After setting process, the control PC should be connected to one of MLCD sets with Ethernet cable only.
For the connection between the MLCD sets, they should be connected with RS-232C cables .
¡ ■ Network¡IP¡setting¡for¡MLCD
1) Execute the LAN Configurator from installation CD.
2) Select Com Port and select
"OPEN"
.
3) Select ID of MLCD which you want to control.
4) Input the authorized IP address .