Orion OLW-4651, User Manual

Page: 29 / 42

- 54 - - 55 -
ORION
Hybrid Video System
- Receive Data
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master
Image Processor
Module ID
IP ID
Value 0X02 0X42 0X02 Variable Variable 0x01 Variable 0x03
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
4. Input Mode Change
- Convert the input mode without the scaling of LCD screen.
A. General Command
STX CMD LENGTH
Data
Check
sum
ETX
ID(1Byte)
Master XY X
Image Processor
Module ID
IP ID
Value 0X02 Variable 0X04 Variable Variable 0x01 0x11 0x01 Variable 0x03
- Send To MLCD
- CMD : 0xDD(DVI 1), 0xDE(DVI 2), 0xDF(DVI 3), 0xE0(DVI 4), 0xE1(DVI Loop In)
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
B. Broadcast Command
STX CMD LENGTH
Data
Check
sum
ETX
ID(1Byte)
XY S X
Image Processor
Module ID
IP ID
Value 0X02 Variable 0X04 0x00 0x11 0x00 0x01 Variable 0x03
- Send To MLCD
• Send the same command for all MLCD. No response will be made.
- Receive Data
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master
Image Processor
Module ID
IP ID
Value 0X02 Variable 0X02 Variable Variable 0x01 Variable 0x03
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
- Send To MLCD
- CMD : 0x41
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
B. Broadcast Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Image Processor
Module ID
IP ID
Value 0X02 0X41 0X01 0x00 Variable 0x03
- Send To MLCD
• Send the same command for all MLCD. No response will be made.
- Receive Data
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Image Processor
Module ID
IP ID
Value 0X02 0X41 0X01 Variable Variable Variable 0x03
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
3. Information
- Display the information on the LCD screen.
A. General Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Master
Image Processor
Module ID
IP ID
Value 0X02 0X42 0X02 Variable Variable 0x01 Variable 0x03
- Send To MLCD
- CMD : 0x42
• ID Range (0x11~0x94): Upper Byte is Image Processor Module Set ID(1~9) and Lower Byte is the ID of IP Board(1~4.) In case of 4 LCD
sets, IDs will be 0x11, 0x12, 0x13, and 0x14.
• Check Sum : Add values from STX to Data and execute logical operation “NOT.”
B. Broadcast Command
STX CMD LENGTH
Data
Check sum ETX
ID(1Byte)
Image Processor
Module ID
IP ID
Value 0X02 0x42 0X01 0x00 Variable 0x03
- Send To MLCD
• Send the same command for all MLCD. No response will be made.