Orchid SoundWave 32, User Manual

Page: 72 / 75

70 SoundWave 32 User's Manual
FCC NOTICE
“This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.”
This equipment generates and uses radio frequency energy and, if not installed and
used properly in strict accordance with the manufacturer’s instructions, may cause
interference to radio or television reception.
This device has been tested and found to comply with the limits for a Class B computing
device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which
are designed to provide reasonable protection against such interference in a residential
installation. Only equipment (computer input/output devices, terminals, printers, etc.)
certified to comply with the Class B limits may be attached to this product.
If this equipment causes interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
1. Reorient the receiving antenna.
2. Relocate the computer with respect to the receiver.
3. Move the computer away from the receiver.
4. Plug the computer into an outlet which resides on a different circuit breaker than
the receiver.
5. If necessary, consult your dealer, or an experienced radio or television technician
for additional suggestions.
You may find the booklet How To Identify and Resolve Radio-TV Interference
Problems
helpful. It was prepared by the Federal Communications Commission and
is available from the U.S. Government Printing Office, Washington, DC 20402. Refer to
stock number: 004-000-00345-4.
Orchid Technology is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. It is the responsibility of the user to
correct such interference.
Operation with non-certified equipment is likely to result in interference to radio and
TV reception. The user must use shielded interface cables in order to maintain the
product within FCC compliance.
FCC# DDS7EF0393-93-SWA
SoundWave 32
Certified compliant with FCC Class B limits, part 15
To meet FCC requirements, shielded cables are required
to connect the unit to a Class B certified device
FCC