Orchid SoundWave 32, User Manual, Page: 42 / 75

Section 3: Technical Help and Information
40 SoundWave 32 User's Manual
Check
1. If an Orchid CD-ROM drive is installed, verify
that the SWCD.SYS device line in the CONFIG.SYS
file is loading before the CDD.SYS device line. If
a Mitsumi or Sony compatible CD-ROM drive is
installed, verify that the SWCD.SYS device line in
the CONFIG.SYS file is loading before any other
CD-ROM device drivers.
2. Verify that the MS-DOS file MSCDEX.EXE is cop-
ied into the SW32 directory or CD-ROM drive
directory.
3. Verify that the path and syntax for each of the
device driver lines (SWCD.SYS and CDD.SYS or
other CD-ROM device driver), and the
MSCDEX.EXE file is correct (refer to Section 2:
Device Drivers).
4. If there is an LASTDRIVE statement in the
CONFIG.SYS file, verify that the drive letter used
is set to a letter after the CD-ROM drive (refer to
your DOS manual for more information).
5. Verify that the colored stripe on ribbon cable is
correctly installed on Pin 1 on both the SoundWave
32 and the CD-ROM drive.
Symptom 4
My CD-ROM drive does not play CD Audio.
Check
1. Verify that the audio cable used matches the pin-
outs for the CD Audio connector. See Section 4 for
the CD-ROM Audio Cable Connector pin assign-
ments. Contact the Orchid Customer Service
department for cable options.