Orchid SoundWave 32, User Manual

Page: 33 / 75

SoundWave 32 User's Manual 31
Section 2: Software Installation
Device Drivers
For any changes or modifications to the device driv-
ers, you may rerun the SINSTALL program, use a text
editor such as MS-DOS "EDIT," or your favorite text
editing program. The following syntax is used for the
MSCDEX.EXE device driver:
[drive:\][path\]mscdex.exe /d:device_name [/l:m]
The parameters are defined as follows:
/d: Specifies the device name of the CD-ROM drive.
The driver1 parameter must match the param-
eter specified by the /D switch on the
CONFIG.SYS command that starts the corre-
sponding CD-ROM device driver.
The MSCDEX command must include at least
one /D switch. To install additional CD-ROM
device drivers, specify an additional /D switch
for each device driver.
/l: Specifies the drive letter of the first CD-ROM
drive. If you have more than one CD-ROM
drive, MS-DOS assigns additional CD-ROM
drives subsequent available drive letters.
/m: Specifies the number of sector buffers.
/e: Specifies that the CD-ROM driver use expanded
memory, if available, to store sector buffers.
/k: Specifies that MS-DOS should recognize CD-
ROM volumes encoded in Kanji. By default,
MS-DOS does not recognize Kanji CD-ROM
volumes.
/s: Enables sharing of CD-ROM drives on MS-
NET or Windows for Workgroups servers.
/v: Directs MSCDEX to display memory statistics
when it starts.