Orchid SoundWave 32, User Manual

Page: 19 / 75

Section 1: Installing SoundWave 32
SoundWave 32 User's Manual 17
Installing the Orchid CD-ROM Drive
If you are installing a CD-ROM drive other than an Orchid
CD-ROM drive, go to the section "Installing other CD-
ROM Drives." Before starting the setup and installa-
tion, make sure that your computer is turned OFF and
the power cord has been disconnected from the wall
outlet. Your CD-ROM drive kit should contain the
following items for a successful installation:
❏
CD ROM Drive with optional slide rails
❏
Interface Cable
❏
Audio Cable
To Install the CD-ROM Drive:
1. If needed, attach the slide rails to the side of the
CD-ROM drive (screws are included). Slide rails
are necessary for some computers with large AT
style cases.
2. Uncover a 5.25" half-height drive bay on the com-
puter, and remove the screws and brackets from
both sides of the drive bay.
3. Slide the CD-ROM drive into the half-height slot,
and secure the drive in place with either screws
and brackets provided with your computer or the
mounting screws provided with the drive.
Figure 1.6: CD-ROM Drive Installation
POWER SUPPLY
CD-ROM
DRIVE
For
installation
of your
CD-ROM
drive, you
will need a
Phillips-
head
screwdriver
and a
flathead
screwdriver.