Orchid SoundWave 32, User Manual

Page: 45 / 75

Section 3: Technical Help and Information
SoundWave 32 User's Manual 43
Check
1. Check for a conflict with the SoundBlaster inter-
face configuration settings. Digitized sounds are
played back through this interface.
2. Verify that the SET BLASTER statement is in the
AUTOEXEC.BAT file. Some applications look
specifically for this statement to set the
SoundBlaster environment. Verify that the set-
tings of the statement match the configuration for
the SoundWave 32 and the software application.
3. Verify that there is sufficient base memory to run
the software application. If you are configuring
the software application for SoundBlaster for digi-
tized sound, and MIDI for Music, the software
application may omit digitized sound if there is
not enough base memory available.
Symptom 9
My joystick does not work when connected to the
SoundWave 32.
Check
1. Verify that the Joystick Port in the SW32.EXE
program is enabled.
2. Many I/O adapter cards have a built-in joystick/
game port (even if they do not contain a 15-pin DB
connector). The SoundWave 32 has its own joy-
stick port. Disable the joystick/game port on the
I/O adapter card.