manualshive.com logo in svg

Orchid SoundWave 32, User Manual, Page: 49 / 75

Share
Download
Orchid SoundWave 32 User Manual Download Page 49

Section 3:

 

Technical Help and Information

SoundWave 32 User's Manual

47

T

ECHNICAL

 I

NFORMATION

The features and specifications of the SoundWave 32
are covered in this section.  Also included are the
specifications for the Joystick/MIDI Port.

SoundWave 32 Technical Specifications

Features

Full compatibility with the following sound
and multimedia standards:
• Sound Blaster
• AdLib
• Microsoft Sound System
• General MIDI
• Roland MPU-401 interface
• Roland MT-32 sound module

 Chipsets

Analog Devices 20MHz ADSP-2115 DSP
Analog Devices 1848 CODEC and Gate Array

Video Standards Supported

MDA, CGA, EGA and VGA

Computers Supported:

ISA machines:

IBM ATs—286, 386, 486,
and compatibles

Card Size:

6" x 4.5"

Connectors:

DB-15 port for joystick/MIDI input/output
3.5 mm mono jack for microphone input
3.5 mm stereo jack for amplified speaker output
3.5 mm stereo jack for line input
3.5 mm stereo jack for line out
On-board interface for Sony CD-ROM drive
On-board interface for Mitsumi CD-ROM drive

Summary of Contents for SoundWave 32












































































Reviews:

No comments