manualshive.com logo in svg

Orchid SoundWave 32, User Manual, Page: 18 / 75

Share
Download
Orchid SoundWave 32 User Manual Download Page 18

Section 1:

 

Installing SoundWave 32

16

SoundWave 32 User's Manual

See Figure
1.4 for the
connection
locations of
the external
devices.

Be sure to
plug in all
cables
before
powering up
your PC.

External Devices

External Speakers

You can connect 4 or 8 ohm external speakers or
headphones to SoundWave 32. The speakers and
headphones plug into the SPEAKER jack on the
SoundWave 32 metal bracket.

Joystick

Plug the joystick into the 15-pin connector on the
metal bracket.

MIDI

If you purchased the optional MIDI interface kit, you
will have  an additional cable.  This cable plugs into
the 15-pin connector and provides MIDI IN and MIDI
OUT connections, in addition to a joystick connec-
tion. Connect this cable to the joystick port and con-
nect any MIDI devices to the appropriate cables.

Line In

You can connect an external mono or stereo audio
source to the SoundWave 32, such as a tape player or
radio.  Use the appropriate converter cable to inter-
face to your external equipment.

Line Out

Allows you to connect the audio output of your
SoundWave 32 to your home stereo or VCR.

Microphone

You can connect a 300-600 ohm microphone to
SoundWave 32.  Plug it into the MIC jack on the metal
bracket.

CD-ROM

The SoundWave 32 supports both internal and exter-
nal CD-ROM drives.  It has interface connectors for
the Mitsumi and Sony internal CD-ROM drives.  To
connect an internal drive, see "Connecting the Orchid
CD-ROM Drive."

Summary of Contents for SoundWave 32












































































Reviews:

No comments