Orchid SoundWave 32, User Manual

Page: 34 / 75

Section 2: Software Installation
32 SoundWave 32 User's Manual
The following syntax is used for the SWCD.SYS
device driver:
device = [drive:\] [path\] swcd.sys /i: /a:
The parameters are defined as follows:
[drive:\] [path\] specifies the drive and path name
where you copied the SWCD.SYS file.
/i: Specifies the interrupt address.
/a: Specifies the I/O address.
The following syntax is used for the CDD.SYS device
driver:
device = [drive:\] [path\] cdd.sys /d:device_name
The parameters are defined as follows:
[drive:\] [path\] specifies the drive and path name
where you copied the CDD.SYS file.
/d: Specifies the device name of the CD-ROM drive
and must be identical to the device name speci-
fied by MSCDEX.
/p: Specifies the I/O address.
/i: Specifies the interrupt address.
/v: Turns on verbose mode of the driver. The
driver will display information about its in-
stallation.