Orban OPTIMOD-FM 8700, Operating Manual

Page: 171 / 390

OPTIMOD-FM DIGITAL OPERATION
3-1
Section 3
Operation
8700i Front Panel
Headphone Jack allows you to monitor the output of the processing through head-
phones. The headphones carry the same output as the rear-panel analog output: ei-
ther analog-channel processing, HD processing, or low-delay monitor processing.
Headphone impedance should be 75

or higher.
Headphone Level Control (the blue control knob to the right of the jack) adjusts
headphone volume.
The red Enter button allows you to choose pop-up menu items, icons, and buttons. If
you are in the Preset screen, it allows you to put a Factory or User Preset on-air once
you have selected it.
If you edit a Factory Preset, you must save it as a new User Preset to retain your edit.
The green joystick, labeled Locate, is a pointing device that allows you to navigate
to settings and controls on each screen. If multiple screens are available, pressing
and holding the knob left or right moves you to the previous and next function
screens.
The yellow Escape button allows you to navigate quickly to underlying screens,
higher-level screens or the Meters screen, or displays the pop-up menu.
When a pop-up item, like Menu, is onscreen,
Escape
always returns you to the un-
derlying screen.
Pressing
Escape
from a secondary screen page, like System Setup > Place / Date /
Time 1 takes you back to the top level; in this case, the System Setup screen.
Escape
from top-level screens (like the System Setup screen), brings you back to the
Meters screen. If you are already in the Meters screen,
Escape
displays the pop-up
Menu.
The Control Knob is the large blue knob on the front panel. Turning the knob scrolls
through displayed lists (like the Preset screen list) or changes a setting that is high-
lighted onscreen (e.g., the setting last selected by the
Locate
joystick). Pushing the
knob in (towards the front panel) displays the pop-up Menu over the previous
screen.