Orban OPTIMOD-FM 8700, Operating Manual

Page: 126 / 390

2-64
INSTALLATION ORBAN MODEL 8700i
A) Set the IP address:
a) From the main menu, navigate to S
YSTEM
S
ETUP
> N
ETWORK
R
EMOTE
>
N
ETWORK
.
b) If you wish to change the IP Address, Locate to
S
ET
A
DDRESS
. Press the
E
NTER
button to access the
S
ET
IP A
DDRESS
screen.
192.168.254.254 is the 8700i default setting.
c)
Locate
to
C
LEAR
, then press the
E
NTER
button.
This will allow you to enter your IP address.
d) Locate to the first number and press the E
NTER
button; repeat until you
have selected all the numbers in the IP address assigned by your network
administrator. When the IP address entry is complete,
Locate to S
AVE
and
press the Enter button.
B) If necessary, set the Subnet Mask assigned by your network administrator:
a)
Locate
to
S
ET
S
UBNET
.
Unless previously set away from the factory default, the Subnet Mask
should indicate
255.255.255.0 .
b) Press the
E
NTER
button to access the
S
ET
S
UBNET
M
ASK
screen.
c)
Locate
to the first number and press the
E
NTER
button; repeat until you
have selected all the numbers in the Subnet Mask. When the Subnet Mask
entry is complete, toggle to
S
AVE
and press the Enter button.
The 8700i will not accept an invalid Subnet Mask (like 255.255.255.300).
C) If necessary, set the Gateway assigned by your network administrator.
To cross subnets, you must specify a gateway. If the PC and 8700i are on
the same subnet, then it is unnecessary to specify a gateway.
If the gateway, port, and firewall (if used) are configured correctly, it is
possible to connect 8700i PC Remote to an 8700i via a VPN.
a)
Locate
to
S
ET
G
ATEWAY
.
Unless previously set away from the factory default, the Gateway should
indicate
0.0.0.0
.
b) Press the E
NTER
button to access the Set Gateway Address screen.
c) Locate to the first number and press the E
NTER
button; repeat until you
have selected all the numbers in the Gateway. When the Gateway entry is
complete, toggle to
S
AVE
and press the Enter button.
D) If necessary, set the Port assigned by your network administrator.
If you are behind a firewall, this port needs to be opened in order to
communicate with the 8700i PC Remote application.
a)
Locate
to
S
ET
P
ORT
.
The default port is 6201.
b) Press the E
NTER
button to access the S
ET
P
ORT
A
DDRESS
screen.