Orban OPTIMOD-FM 8700, Operating Manual

Page: 308 / 390

6-6
TECHNICAL DATA ORBAN MODEL 8700i
Number of Output Channels Supported: Two stereo pairs.
Sample Rate: 44.1, 48, 88.2 and 96 kHz.
Networking: Two RJ45 Ethernet connectors for connection to dedicated audio-over-IP
LANs (supports DANTE redundancy). These connections are independent of the Opti-
mod’s main Remote Computer Interface and have their own IP and MAC addresses.
These are automatically assigned and can be discovered in Dante Controller.
Chip Manufacturer: Audinate Pty Ltd
Remote Computer Interface
Supported Computer and Operating System: IBM-compatible PC running Microsoft Win-
dows® 7 or higher.
Configuration: TCP/IP protocol via direct cable connect, modem, or Ethernet interface.
Suitable null modem cable for direct connect is supplied. Modem and other external
equipment is not supplied.
Serial Connectors: RS
–232 port (3) DB–9 male, EMI-suppressed. Serial Connector 1 uses
PPP to provide for direct or modem connection to the 8700i PC Remote application. Se-
rial Connector 2 supports communication to a computer or remote control system via
simple ASCII commands for administration and recalling presets. Serial Connector 3 is
reserved for future developments.
Ethernet Connector: Female RJ45 connector for 10-100 Mbps networks using CAT5 ca-
bling. Native rate is 100 Mbps. Provides for connection to the 8700i PC Remote applica-
tion through either a network, or, using a crossover Ethernet cable, directly to a comput-
er.
Ethernet Networking Standard: TCP/IP.
Remote Control (GPI) Interface
Configuration: Eight (8) inputs, opto-isolated and floating.
Voltage: 6 - 15V AC or DC, momentary or continuous. 9VDC provided to facilitate use with
contact closure.
Connector: DB-25 male, EMI-suppressed.
Control: User-programmable for any eight of user presets, factory presets, bypass, test
tone, stereo or mono modes, analog input, digital input.
Filtering: RFI filtered.
Tally Outputs (x2)
Configuration: NPN open-collector
Maximum Voltage: 30 VDC positive. Protected against reverse polarity by a diode; do not
exceed 50 mA through this protection diode.
Maximum Current: 30 mA; current must be limited externally.
Power
Voltage: 90
–240 VAC, auto-selected, 50–60 Hz, 50 VA, dual-redundant.
Connector: 2 x IEC, EMI-suppressed.
Safety Standards: ETL listed to UL standards, CE marked.
Physical and Environmental
Dimensions (W x H x D):
19” x 5.25” x 15.5” / 48.3 cm x 8.9 cm x 39.4 cm. Depth shown
indicates rack penetration; overall front-to-
back depth is 17.75” / 45.1 cm. Three rack
units high.