Orban OPTIMOD-FM 8700, Operating Manual

Page: 153 / 390

OPTIMOD-FM DIGITAL INSTALLATION
2-91
In the System I/O RDS tab, turn on the RDS generator by setting 57 kHz RDS control
to
YES
. You can also set up the Modulation level and all other RDS I/O controls in the
System I/O RDS screens per the screenshot above. Table 2-1 shows a list of RDS con-
trols available in System I/O.
When you open I/O RDS screen in the PC remote when the System RDS controls are
active, the Optimod will update the RDS output when a control is changed or if you
select the
D
ONE
button.
Using Processing Presets
RDS adjustment via processing presets are available only from PC Remote.
To use processing presets, edit your on-air preset with the RDS checkbox
U
SE
S
YSTEM
RDS V
ALUES
deselected. Then set the RDS preset controls as required and save the
result as a new user preset. It is possible to make as many user presets as you want
whose audio processing controls are set identically, but the RDS controls are set dif-
ferently.
These controls are located in the processing preset’s RDS tab in PC remote.