Connecting the Copper Cables
3.
Press down on the plastic tab to release the ExpressModule latch and pull the
lever out until it is nearly perpendicular to the ExpressModule front panel.
4.
Insert the HBA into its slot, being careful that the tooth on the bottom of the lever
does not come into contact with the chassis sheet metal during insertion.
5.
After the HBA is inserted nearly all the way into its slot, push the lever back
into its fully closed position, allowing the lever tooth to insert the HBA fully into
place.
Connecting the Copper Cables
You can connect copper cables to the HBA. This section contains the following topic:
■
“To Connect the Copper Cables” on page 23
Note -
The HBA will not automatically downgrade to the required FC speed based on cable
length, if both links are capable of a higher operating speed. You must downgrade the speed
with the appropriate utility or link errors might occur.
22
Sun Storage 16 Gb Fibre Channel ExpressModule Host Bus Adapter, Emulex Installation Guide For HBA Model
7101690 • January 2018
Summary of Contents for 7101690
Page 2: ......
