To Connect the Copper Cables
To Connect the Copper Cables
Use any SFP+ direct attach twin-ax copper cables to attach devices to the HBA.
1.
Insert one end of the copper cables into empty SFP+ cages on the HBA.
Ensure that the cables are fully inserted and secured.
The following figure shows how to connect the HBA with a copper cable.
2.
After the copper cables are connected to the HBA, insert the other end of the
cables into the empty SFP+ cages on any FC supported switches.
Note -
Link Aggregation Control Protocol (LACP) cannot be used on the same port as iSCSI.
Powering on the System
This section provides basic instructions on how to apply power to the system. For detailed
instructions, see your system documentation.
Chapter 2 • HBA Installation, Configuration, and Removal
23
Summary of Contents for 7101690
Page 2: ......
