To Upgrade Firmware Using the OneCommand Manager CLI
To Upgrade Firmware Using the OneCommand Manager CLI
This section describes how to update firmware using the OneCommand Manager noninteractive
and interactive command-line interface (CLI). Before performing this procedure, ensure the
prerequisites are met, as described in
“To Upgrade Firmware Using the OneCommand Manager
Do one of the following:
■
From the noninteractive OneCommand Manager CLI, type the following
command:
hbacmd Download
<
the-WWPN-of-the-HBA
> <
full-path-and-name-of-firmware-file
>
■
From the interactive OneCommand Manager CLI (for the Oracle Solaris OS),
follow these steps:
a.
Navigate to the directory containing the
emlxadm
file (path:
/opt/
EMLXemlxu/bin
), and run the
emlxadm
utility.
For example:
root@
<
host-name
>
:/opt/EMLXemlxu/bin# ./emlxadm
The available HBAs are listed.
b.
Select the HBA you want to upgrade (you need to do this only once per
device).
EMLXADM Device Management Utility, Version: 1.08.4.0
Copyright (c) 2004-2012 Emulex. All rights reserved.
Available Emulex HBA's:
1. SFS:emlxs0 : /devices/pci@78,0/pci8086,3c04@2/pci10df,e20e@0/fp@0,0
(CONNECTED)
2. SFS:emlxs1 : /devices/pci@78,0/pci8086,3c04@2/pci10df,e20e@0, 1/fp@0,0
(CONNECTED)
3. SFS: emlxs10 : /devices/pci@78,0/pci8086,3c0a@3,2/pci10df,e20e@0/fp@0,0
(CONNECTED)
Enter an HBA number or zero to exit:
1
c.
Upgrade the firmware on the selected HBA by issuing the following
command:
Chapter 3 • Software Installation
35
Summary of Contents for 7101690
Page 2: ......
