3
♦ ♦ ♦ C H A P T E R 3
Software Installation
After you have completed the HBA hardware installation and powered on the system, follow
the instructions in this chapter to install any HBA utilities, firmware, and operating system-
specific drivers, in that order, that might be required by the HBA.
Note -
Software listed in this chapter as being located at the Oracle designated web site will
only be available at the web site if required by the HBA.
This chapter contains the following topics:
■
“Utilities for Upgrading the BIOS and Firmware ” on page 31
■
“Installing Diagnostic Software” on page 36
■
“Installing Drivers” on page 39
Utilities for Upgrading the BIOS and Firmware
Use the OneCommand Manager command-line interface (CLI) or the OneCommand Manager
graphical user interface (GUI) to update the BIOS and firmware for the HBA. These utilities
provide support for the following functions:
■
Discover local and remote hosts, HBAs, targets, and LUNs.
■
Reset HBAs.
■
Set HBA driver parameters.
■
Update firmware.
■
Enable or disable the system BIOS.
■
Run diagnostic tests on HBAs.
■
Manage out-of-band HBAs.
■
Manage local and in-band remote HBAs.
Chapter 3 • Software Installation
31
Summary of Contents for 7101690
Page 2: ......
