To Upgrade Firmware Using the OneCommand Manager GUI
■
“To Upgrade Firmware Using the OneCommand Manager GUI” on page 33
■
“To Upgrade Firmware Using the OneCommand Manager CLI” on page 35
To Upgrade Firmware Using the OneCommand Manager GUI
From the Maintenance or Firmware tab of the OneCommand Manager GUI, you can update
firmware on local and remote HBAs.
Before You Begin
Before performing this procedure, ensure the following is true:
■
The HBA driver is installed, as described earlier in this chapter.
■
The OneCommand Manager application is installed and the application is NOT running in
read-only mode.
■
The HBA firmware zip file is downloaded from the Oracle support area of the Emulex web
site, unzipped, and extracted to a folder on a local drive.
■
If the HBA is already connected to a boot device, the system is in a state in which this type
of maintenance can be performed:
■
I/O activity on the bus is stopped.
■
Cluster software, or any other software that relies on the HBA to be available, is stopped
or paused.
1.
From the OneCommand Manager GUI, select Host or Fabric view.
2.
In the discovery-tree, select the HBA for which you want to upgrade firmware.
3.
Select the Maintenance or Firmware tab and click Download Firmware.
4.
If the warning screen appears, click Yes.
Chapter 3 • Software Installation
33
Summary of Contents for 7101690
Page 2: ......
