To Install Utilities for Updating the BIOS or Firmware:
For more information about the
HBAnyware
and
OneCommandManager
utilities, download their
user manuals from the Emulex (Broadcom) support site for Oracle at:
To Install Utilities for Updating the BIOS or
Firmware:
1.
Go to the Emulex (now Broadcom) support site for Oracle at:
https://www.broadcom.com/support/oem/oracle-fc/
2.
Click the type of HBA, and then click the model number of the HBA for which you
want to install utility software.
3.
In the Utilities section, click the utility for the OS that you want, and download
the utility to a local file system.
4.
Install the utility as described in the Emulex documentation, located on the
Emulex (Broadcom) web site.
Upgrading Firmware
This section provides basic instructions on how to update HBA firmware using the
OneCommand Manager graphical user interface (GUI) and command-line interface (CLI).
For detailed information, see the Emulex OneCommand Manager application documentation,
located at the Oracle support area of the Emulex web site:
support/download-search/?pg=AdContrand+ICs&pf=Fibre
+Host+Bus+Adapters&pn=&po=Oracle&pa=&dk=
If the HBA is in the CNA operating protocol mode and is installed in a system running the
Oracle Linux UEK or Oracle VM operating systems, you must use the
elxflash
toolkit to
update firmware. This toolkit and instructions are available at the Oracle support area of the
Emulex web site:
https://www.broadcom.com/support/oem/oracle-fc/
If the HBA is in a configuration that allows multiple virtual functions, note that firmware can
only be upgraded in the primary function domain. Any attempt to do so in a virtual function
domain might cause the system to hang.
This section contains the following topics:
32
Sun Storage 16 Gb Fibre Channel ExpressModule Host Bus Adapter, Emulex Installation Guide For HBA Model
7101690 • January 2018
Summary of Contents for 7101690
Page 2: ......
