OPHIR vega, User Manual

Page: 61 / 109

60
measure to 30mW or more without saturation. When the
additional filter is installed, the maximum power is on the
order of 300mW (or 3W with model PD300-3W). The
PD300 saturates when the output current exceeds 1.3mA
so the exact maximum power depends on the sensitivity
of the detector at the wavelength used. When saturated,
the legend "OVER" will appear on the screen. Table 2
gives the actual maximum power as a function of
wavelength.
Filter Out
Wave
Length
PD300 PD300
-TP
PD300
-3W
PD300
-UV
3A-IS Wave-
Length PD300
-IR
PD300
-IRG
250-350nm N.A. N.A. N.A. 3mW N.A. 800nm 12mW 0.8mW
400nm 30mW 3mW 100mW 3mW N.A. 1-1.3µm 30mW 0.8mW
633nm 20mW 2.5mW 100mW 3mW 1W 1.4µm 30mW 0.8mW
670nm 13mW 2mW 100mW 3mW 2W 1.5µm 25mW 0.8mW
800nm 10mW 1.5mW 100mW 2.5mW 3W 1.6µm 30mW 0.8mW
900mm 10mW 1.5mW 100mW 2.5mW 3W 1.8µm 30mW N.A.
1060nm 25mW 3mW 100mW 3mW 3W
Filter In
Wave
Length
PD300 PD300-TP PD300-
3W
PD300-UV 3A-IS Wave
Length
PD300-IR PD300-
IRG
250-350nm N.A. N.A. N.A. 300mW N.A. 800nm 0.8mW 100mW
400nm 300mW 1W 3W 300mW N.A. 1-1.3µm 0.8mW 30mW
633nm 300mW 1W 3W 300mW 1W 1.4µm 0.8mW 150mW
670nm 200mW 500mW 2W 300mW 2W 1.5µm 0.8mW 150mW
800nm 100mW 300mW 1.2W 150mW 3W 1.6µm 0.8mW 150mW
900mm 150mW 300mW 1.2W 150mW 3W 1.8µm N.A. N.A.
1060nm 250mW 500mW 2.2W 300mW 3W
Maximum Measurable Laser Power as a Function of Wavelength
5.2 Setting up the PD300 to display the user's chosen
wavelengths
The PD300 series has built in wavelength correction
curves for measurements either with the removable filter
installed (filter-in) or removed (filter-out). These curves
are stored in the sensor EEROM. The correction curves,
with a resolution of 1nm, ensure that the power reading is
correct at all laser wavelengths.
In order to simplify changing from one laser wavelength
to another, the user can program up to 6 different
wavelengths to be available from the screen menu.
Please use the following
procedure to set the PD300 to
your laser wavelengths.
Table 2