Batteries
8
82
2. Insert the new batteries
Insert two new AA alkaline batteries into the battery compartment. The icons in
the battery compartment will guide you in placing the batteries.
Lower cover onto the back of the meter, push down on the blue circle, and slide
back into place.
If the meter does not power on after you have replaced the meter batteries,
check that the batteries are correctly installed. If the meter still does not power
on, contact Customer Service and/or LifeScan® sales representative.
3. Check the meter settings
Removing the meter batteries will not affect any stored results. However, you may need to re-set the
meter settings. (See pages 16-18.)
4. Dispose of batteries
Dispose of batteries according to your local environmental regulations.
Yellow = 5mm margin, Red = 7mm margin
Yellow = 5mm margin, Red = 7mm margin
AW05948101B_OT_V_OB_Insides_R1.indd 82
4/3/12 3:08 PM
