background image

Detailed information about the system

10

 

103

Guarantee

LifeScan® guarantees that the OneTouch® Verio™Pro+ Meter will be free of defects in material and 
workmanship for three years, valid from the date of purchase. The guarantee extends only to the original 
purchaser and is not transferable.

Electrical and safety standards

This meter complies with CISPR 11: 2009, Class B (Radiated Only). Emissions of the energy used are 
low and not likely to cause interference in nearby electronic equipment. The meter has been tested for 
immunity to Level 3 electrostatic discharge as specified in IEC 61000-4-2. This meter has been tested for 
immunity to radio frequency interference over the frequency range 80MHz to 2.5GHz at 3V/m as specified 
in IEC 61000-4-3.

CAUTION

Possible fire hazard when used with oxygen administering equipment other than the nasal mask/cannula 
or ½ bed length tent type.

Yellow = 5mm margin, Red = 7mm margin

Yellow = 5mm margin, Red = 7mm margin

AW05948101B_OT_V_OB_Insides_R1.indd   103

4/3/12   3:08 PM

Summary of Contents for VERIOPRO +














































































































Reviews: