One Stop Systems
ExpressBox 3200 | 3 Software Installation
38
The picture below depicts three PCIe card cards being recognized / detected.
3.2.3 Linux
Once the EB3200 expansion unit has been installed in a Linux-based system, its installation can be verified
by typing the following command lines:
aspic –t
Displays the overall structure of the PCIe expansion system
lspci –vv
Lists additional information about the PCIe switch (in our case it will list the Integrated Device
Technology (IDT) information.
Ispci –vvv
Displays the most comprehensive information about the expansion system.
Typical output from lspci –vvv is verbose, but you can dig through the information to find very important information. There are many registers
and settings associated with PCI Express Switches.
Use the “lspci | grep “IDT”
command to check that the OSS card slot devices are detected (see image below). IDT is the PCIe switch
(component) on the OSS expansion board.
Four instances of PCI Bridges / IDT
Summary of Contents for EB3200
Page 1: ...ExpressBox 3200 PCIe to PCIe Expansion User Manual SKU EB3200 www onestopsystems com...
Page 13: ...One Stop Systems ExpressBox 3200 1 Introduction ExpressBox 3200 13 1 8 Parts Overview...
Page 31: ...One Stop Systems ExpressBox 3200 2 Hardware Installation 31 2 8 2 Clamp Position Orientation...
Page 85: ...Manual P N 09 09959 03 Rev A...
