One Stop Systems
ExpressBox 3200 | 3 Software Installation
40
3.3
Check PCIe cards
3.3.1 Mac OS X
1.
Your first step will vary depending on which version of Mac OS X you are using:
Mac OS X 10.6.8 Snow Leopard or earlier:
OS X Lion 10.7 or later:
Open System Information by choosing About this
2.
Click PCI cards
NOTE
If your PCIe cards are not being detected or recognized, you need to check the LED indicators on both interface cards and
see if both cards are displaying the correct LED status. A normal LED status should display a full x8 link, and 8 solid green,
this signifies that your host computer is linked to your expansion chassis at full bandwidth.
If you are seeing three solid green LEDs and one amber LED, shutdown the host computer and the expansion chassis,
reseat the host card, expansion card and cable.
If your PCIe cards are still not detected, try another known good card. If this works, it means the problem is with the card.
If swapping the PCIe card still exhibiting the same issue, you may have a OSS expansion related problem or the computer is a having issue (i.e.
Motherboard).
Summary of Contents for EB3200
Page 1: ...ExpressBox 3200 PCIe to PCIe Expansion User Manual SKU EB3200 www onestopsystems com...
Page 13: ...One Stop Systems ExpressBox 3200 1 Introduction ExpressBox 3200 13 1 8 Parts Overview...
Page 31: ...One Stop Systems ExpressBox 3200 2 Hardware Installation 31 2 8 2 Clamp Position Orientation...
Page 85: ...Manual P N 09 09959 03 Rev A...
